BZGNSS BZ-251 GPS with 5883 Compass
US$20.99
SpeedyBee F405 WING APP Fixed Wing Flight Controller
US$39.99
- SKU:
- SB-F405WING-APP
- Shipping:
- Free Shipping
Specifications
| Product Name | SpeedyBee F405 WING FC board |
| MCU | STM32F405,168MHz,1MB Flash |
| IMU(Gyro&Accelerometer) | ICM-42688-P |
| Barometer | SPL006-001 |
| OSD Chip | AT7456E |
| Blackbox | MicroSD Card Slot |
| UART | 6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection)) |
| I2C | 1x Used for magnetometer, digital airspeed sensor |
| ADC | 4x (VBAT, Current, RSSI, Analog AirSpeed) |
| PWM | 12x (11+1“LED”pad) |
| ELRS/CRSF receiver | Supported,connected to UART1 |
| SBUS | Built in inverter for SBUS input (UART2-RX) |
| LED | 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB |
| RSSI | Supported,Named as RS . |
| Supported FC Firmware | INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING |
| Weight | 8.9g |
| Product Name | SpeedyBee F405 WING PDB board |
| Input voltage range | 7~36V (2~6S LiPo) |
| Battery Voltage Sensor | Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot) |
| Battery Current Sensor | 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot) |
| TVS Protective diode | Yes |
| FC BEC output | Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip |
| VTX BEC output | Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera. |
| Servo BEC output | Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos. |
| Weight | 11.4g |
| Product Name | SpeedyBee F405 WING Wireless board |
| Wireless Configuration (long press BOOT button for 6 seconds to switch modes) | BLE mode, connect to Speedybee APP |
| Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc. | |
| Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner | |
| LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes) | 4x WS2812 LED strip connectors, adjustable colors and flashing modes |
| Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads | |
| On-board battery level indicator | 4x RGB indicator LED for battery level display by number of lights |
| Weight | 4.2g |
6 Reviews Hide Reviews Show Reviews
-
SpeedyBee F405 WING APP Fixed Wing Flight Controller
SUPER Flight Controller
-
Great flight controller.
Easy to install. I was worried about soldering the headers but wasn't that bad. I'm a newbie to flight controllers but getting this one up for my plane was easy even with no experience with INAV. The wireless config app is very nice to have. Sent in a few questions and always got a response the next day. That's is a plus... Anyway it's a good option to get into INAV. It works and is budget friendly.
-
A good choice
This is now the 3rd flight controller from SpeedyBee and I am still very happy with it. The connectors for GPS, CAM, VTX and receiver make installation very quick. This is true as I installed the first two in new models. But the last one I bought replaces an older Matek FC and it is different because the devices mentioned above are connected via Dupont connectors. So I had the choice of either cutting the connectors off all the cables and then soldering them or (which is what I did) building adapters so that I could connect the 2.54mm Dupont connectors to the SpeedyBee connectors. A bit cumbersome, especially as the cables are already built into the model, but this way I can change at any time.
-
Mounting
In general it’s good but missing some mounting features. Like extra screws and or specific drilled holes for attaching it to the frame, but there is some free 3d plans for some casings
-
Mounting
In general it’s good but missing some mounting features. Like extra screws and or specific drilled holes for attaching it to the frame, but there is some free 3d plans for some casings
-
Recensione
Ottima