Phone Model | Battery Capacity | Battery level after half an hour of charging |
Mi 11 Ultra | 5000mAh | 52% |
Samsung S10 | 3400mAh | 49% |
HUAWEI P40 Pro | 4400mAh | 45% |
iPhone 11 | 3110mAh | 22% |
Product Name | SpeedyBee Adapter 3 |
Power Input Voltage Range | 1-6S(3.8V+ for 1S) |
Power Input Connector | XT60-Male, PH2.0 male |
Required Mobile Device System Version | Android 7.0+ | iOS 12.0+ |
Supported SpeedyBee App Version | V1.6.1 + for iOS | V1.5.6+ for Android |
Supports Firmware | Configurators and Flashing: • Betaflight 3.2.0 and above • iNAV 2.0.0 and above • EmuFlight 0.1.0 and above Flashing only, excludes Configurators: • Ardupilot |
Wireless signal transmission frequency | • Bluetooth frequency: 2402 - 2480 MHz • WiFi frequency: 2412 - 2484 MHz |
Maximum Output Current for flight controllers | 700mA @5V |
Fast Charging Output interface | USB A Port |
Minimum Input Voltage for Charging output | 7.4V(2S LiPo) |
Supported Fast Charging Protocol | • QC3.0/QC2.0 • AFC • FCP • SCP/High SCP • PE2.0/PE1.1 • SFCP |
Max Fast Charging Current | 3.5A |
Max Fast Charging Power | 30W |
Case Material | ABS + PC |
Liquid Silicone Cable Length | 12.4cm |
Dimension(Main Body) | 24.8*21.8*53.6mm |
Net Weight | 35g |
Item | SpeedyBee Adapter 3 | SpeedyBee Adapter 2 | OTG |
Support 1-6S LiPo input | ✔ | ✔ | N/A |
XT60 and PH2.0 connectors | ✔ | ✔ | N/A |
BF/INAV/EMU configuration | ✔ | ✔ | ✔ |
Flight control firmware upgrade | ✔ | ✔ | ✘ |
Built-in WiFi | ✔ | ✔ | ✘ |
Built-in Bluetooth | ✔ | ✘ | ✘ |
Blackbox downloader and analyzer | ✔ | ✘ | ✘ |
Built-in MicroUSB and Type C connector | ✔ | ✘ | ✘ |
Fast charging output up to 30W | ✔ | ✘ | ✘ |
Built-In LiPo Voltage Checker | ✔ | ✘ | ✘ |
Posted by Stechr Frank on 11th Nov 2024
all the best