
Model | SpeedyBee Mario 5 Frame |
Mario 5 DC Wheelbase | 227mm |
Mario 5 DC Weight | 129 ±5g (3D Printed Parts Excluded) |
170 ±5g (3D Printed Parts and Injection) | |
Mario 5 XH Wheelbase | 226mm |
Mario 5 XH Weight | 126 ±5g (3D Printed Parts Excluded) |
167±5g (3D Printed Parts and Injection) | |
Top Plate Thickness | 2.5mm(T300 3K) |
Middle Plate Thickness | 2.0mm(T300 3K) |
Bottom Plate Thickness | 2.5mm(T300 3K) |
Arm Thickness | 6mm(T300 3K) |
Camera Mounting Screw | 7mm |
3D Printed Parts | Yellow TPU |
Battery Anti-Slip Pad | Silicone 3mm |
Motor Spring Hole Position | Φ8mm |
Compatible Propeller Size | Max 5.1 Inch |
Motor Mounting Hole Distance | 16-19mm |
FC Mounting Hole | 30.5x30.5(M3) |
VTX Mounting Hole | 20x20(M2) / 25.5x25.5(M2) |
Head Material | Aviation Aluminum Alloy |
Aluminum Column Material | 7075 D5*23mm/D46*22mm |
Internal Mounting Height | 23-31mm |
Receiver Installation Space | 25*13*6mm |
Suitable Capacitor Size | Φ10mm*20mm |
GPS Installation Size | 18*18*7 |
Camera Compatibility | 19mm/20 |
Posted by Daniel Yusim on 8th Feb 2025
Photos: https://www.instagram.com/p/DFytIogpQNp
Video: https://youtu.be/RyZN5uH1xd8?si=PsjXMPGBq9dreXhV
Cons:
- Unnecessarily thick plastic on head can press on stack connector.
- bad for gyro vibrational isolation and overall durability
- I sanded it and flipped the FC solderpad-side up.
- Awful, non-sticky battery pad. Don't use it.
- After trying it, I ripped it off and put mounting tape on the sides with extra around two of the screws for more height, then cut a generic "sticky battery pad" to shape and stuck it to the mounting tape.
- No 30x30 mounting option for a higher-power VTX.
- No extra screws.
- No GPS mount unless you have a 3D printer. (they don't/didn't sell the part)
- More than one screw size. (minor issue)
Pros:
- Overall, an amazing frame. Top choice for analog 5".
- Easy build.
- Stack and VTX mounting screws are isolated from arms. (less motor noise and easier arm swaps)
- Easily fits large cap below ESC.
- And I fit another one above the VTX.
- Arms are all interchangeable on the XH frame.
- Cheap arms/parts with fast shipping/US warehouse.
- Still has protected space behind camera for mini buzzer+battery module.
- I think I'll be able to mount a GPS with a generic mount at the front of the quad.
Posted by Ben Smith on 15th Jan 2025
"I absolutely love this frame. The carbon is top-notch, and the thickness of the arms gives me complete confidence that they won’t break after a hard impact. The build quality is exactly what you’d expect from a leading brand. The frame is highly customizable, compact, and still provides ample space.
Posted by Dan on 5th Jan 2025
The Best 5 inch frame i have assembled, and pairs well with the F7 V3 flight controller
Posted by Silvio on 19th Nov 2024
The intricate frame parts are machined precisely and of high tolerance, overall excellent product.
Posted by Gary Cottrell on 11th Aug 2024
this is one of the best builds I have done a lot of though has been put into this. the way the capacitor is hidden out of the way and a heat sink for the 03 modules
Posted by tomikalone6@gmail.com on 29th Jun 2024
Good frame