Flight Controller
Product Name | SpeedyBee F405 AIO |
MCU | STM32F405 |
Gyro | ICM-42688P |
USB Port Type | Type-C |
Barometer | SPA06-003 |
OSD | Supported |
Bluetooth BLE | Supported, Bluetooth speed enhancement - 2.0 |
Wireless Flight Controller Firmware Update | Supported (no need to press physical BOOT button) |
Wireless Download & BlackBox Analysis | Not supported |
DJI Air Unit Connection Method | Supports both 6-pin direct insertion and soldering |
6-pin DJI Sky Port Direct Insertion | Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order |
Flash (for BlackBox) | 8MB |
Betaflight CC Pads (Camera Parameter Adjustment) | Supported |
Input Voltage | 3S-6S LiPo battery |
4V5 Output | Two 4V5 outputs; total current 1A |
5V BEC Output | Three 5V outputs; total current 2A; shared with 4V5 |
9V BEC Output | None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A |
MOTOR | M1-M4 |
UART | 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2]) |
ESC Telemetry | None |
I2C | Supported |
LED Pads | Supported, used to control WS2812 LED lights |
Buzzer Pads | Supported, BZ+ and BZ- pads |
BOOT Button | Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery |
RSSI Pads | None |
SmartPort | Not supported |
Supported Flight Controller Firmware | BetaFlight (Default), INAV |
Firmware Target Name | SPEEDYBEE F405AIO |
Mounting | 25.5 x 25.5mm, 2mm hole diameter |
Dimensions | 33.0mm (length) x 33.0mm (width) x 8mm (height) |
Weight | 13.6g (including CNC) |
ESC
Product Name | SpeedyBee F405 AIO |
Input Voltage | 3-6S LiPo battery |
Continuous Current | 40A |
Burst Current | 45A (10s) |
ESC Protocol | Supports DSHOT600/300; other protocols may cause severe errors, please use with caution. |
Output Voltage | VBAT battery voltage (used to power the flight controller) |
Current Sensor | Supported (Scale = 254, Offset = 0) |
Firmware | Bluejay JH-40 48kHz |