Full-featured BF/INAV/Emu configrator in your pocket
·Upgrade FC firmware via App ·Full-featured BF/INAV/Emu configuration ·Built-in WiFi ·XT60 & PH2.0 battery connectors ·1-6S power input
Upgrade your flight controller via App!
We put a WiFi chip in the Adapter 2 which greatly improves the transmission speed and makes it possible to upgrade your flight controllers The whole upgrading process costs only 2-3 minutes. * The firmware flashing currently supports Betaflight/Emuflight via WiFi connection to the Adapter 2.
Full-featured BF/INAV/Emu configuration.
Now the SpeedyBee Adapter 2 is a full-featured mobile BF/iNav/Emu configurator. Just go to the field to fly without carrying a heavy laptop.
Power the whole thing with one battery.
Soldering work should be done on the user end on the previous generation. But the Adapter 2 now has built-in XT60 and PH2.0 connectors which both support 1-6S LiPo batteries input*. As the Adapter 2 can power your flight controller, you don't need another battery to power your quad.
*For 1S batteries, 3.8V or above is requried. Because some(very few) quadcopters may consume a lot of current, and the output voltage of the adapter 2 will be greatly reduced.
One Adpater 2 for all of your quads!
With one Adapter 2, you could connect to all of your quads running Betaflight or iNav.
Say goodbye to OTG problems.
Some Android phones don't support OTG or can't supply suficient power to your flight controllers... But with Adapter 2, just say goodbye to all these problems.
The lanyard-style cable is easy to store.
The liquid silicone cable is with two same micro USB ports on both ends. The connection is tight enough to prevent the cable from being lost. The lanyard-style cable can even easily carry 500 grams.
'TO FC' stands for 'unplug the USB cable from this end, then plug the cable into your flight controller'.